Design Specs - English
Weight Load Chart
How To Create A Part Number:
Model – Height – Hinged Bar Location* – Separators – Length – Bracket (fixed) – Bracket (moving)**
Example: NP200-14-OUTER-2-41.23-STSTR#2-STSTR#2
⇒ The standard separator placement is every 4th link. Please specify the number of separators specified per cavity.
⇒ Vertical cavity separators snap into carrier cross bars to provide multiple compartments in a single link.
⇒ Length is specified in inches, to two decimals. It is the distance between flanges
⇒ (see formula on carrier side view diagram)
*Note: Hinged bars are available on inner or outer radius. Hinged bars on inside radius is standard. Please specify when ordering.
**For example: STRAIN#1 Strain relief brackets are standard. See Mounting Brackets tab.
Carrier Cross Sectional View
| Model |
A (inside width) |
C (outer width) |
Weight (lb/ft) |
| NP200 |
2.00 |
2.63 |
0.72 |
| NP250 |
2.50 |
3.13 |
0.74 |
| NP300 |
3.00 |
3.63 |
0.78 |
| NP400 |
4.00 |
4.63 |
0.85 |
| NP500 |
5.00 |
5.63 |
0.95 |
| NP600 |
6.00 |
6.63 |
1.03 |
Specifications are listed as inches unless otherwise noted
Carrier Side View inches (mm)
Travel/2 + CL (+ Offset Distance From Center*) = Length
Dynatect recommends mounting the stationary end of the carrier at the center of travel, minimizing the required length.
In cases where center mounting is not possible, add the distance offset from center to the carrier length calculation.
| Height |
R (bend radius) |
H (curve height) |
K (depot) |
CL (curve length) |
| 7 |
2.50 |
7.00 |
5.67 |
12.18 |
| 8 |
2.95 |
7.90 |
6.12 |
13.59 |
| 10 |
3.94 |
9.88 |
7.11 |
16.70 |
| 12 |
4.92 |
11.84 |
8.09 |
19.78 |
| 14 |
5.91 |
13.82 |
9.07 |
22.87 |
| 18 |
7.87 |
18.00 |
11.04 |
29.04 |
Specifications are listed as inches unless otherwise noted
Mounting Brackets
Bracket Arrangements
Mounting Bracket Diagram & Dimensions
Strain relief mounting brackets are standard. Universal brackets are available (drawings below).
| Model No. |
Q in (mm) |
| NP200 |
1.19 (30) |
| NP250 |
1.69 (43) |
| NP300 |
2.19 (56) |
| NP400 |
3.19 (81) |
| NP500 |
4.19 (106) |
| NP600 |
5.19 (132) |
NP Universal Bracket (PDF)
NP Universal Bracket (DWG)
Design Specs - Metric
How To Create A Part Number:
Model – Height – Hinged Bar Location* – Separators – Length – Bracket (fixed) – Bracket (moving)**
Example: NP200-14-OUTER-2-41.23-STSTR#2-STSTR#2
⇒ The standard separator placement is every 4th link. Please specify the number of separators specified per cavity.
⇒ Vertical cavity separators snap into carrier cross bars to provide multiple compartments in a single link.
⇒ Length is specified in inches, to two decimals. It is the distance between flanges
⇒ (see formula on carrier side view diagram)
*Note: Hinged bars are available on inner or outer radius. Hinged bars on inside radius is standard. Please specify when ordering.
**For example: STRAIN#1 Strain relief brackets are standard. See Mounting Brackets tab.
Carrier Cross Sectional View
| Model |
A (inside width) |
C (outer width) |
Weight (kg/m) |
| NP200 |
51 |
67 |
1.07 |
| NP250 |
64 |
80 |
1.1 |
| NP300 |
76 |
92 |
1.15 |
| NP400 |
102 |
118 |
1.26 |
| NP500 |
127 |
143 |
1.41 |
| NP600 |
152 |
168 |
1.54 |
Specifications are listed as millimeters unless otherwise noted
Carrier Side View
Travel/2 + CL (+ Offset Distance From Center*) = Length
Dynatect recommends mounting the stationary end of the carrier at the center of travel, minimizing the required length.
In cases where center mounting is not possible, add the distance offset from center to the carrier length calculation.
| Height |
R (bend radius) |
H (curve height) |
K (depot) |
CL (curve length) |
| 7 |
64 |
178 |
144 |
309 |
| 8 |
75 |
201 |
155 |
345 |
| 10 |
100 |
251 |
180 |
424 |
| 12 |
125 |
301 |
205 |
502 |
| 14 |
150 |
351 |
230 |
581 |
| 18 |
200 |
457 |
280 |
738 |
Specifications are listed as millimeters unless otherwise noted
Mounting Brackets
Bracket Arrangements
Mounting Bracket Diagram & Dimensions
Strain relief mounting brackets are standard. Universal brackets are available (drawings below).
| Model No. |
Q in (mm) |
| NP200 |
1.19 (30) |
| NP250 |
1.69 (43) |
| NP300 |
2.19 (56) |
| NP400 |
3.19 (81) |
| NP500 |
4.19 (106) |
| NP600 |
5.19 (132) |
NP Universal Bracket (PDF)
NP Universal Bracket (DWG)
